|
INSTALLATION INSTRUCTIONS
Insul-Tarp® has been designed to be installed quickly and easily by following a few easy steps.
1) Insul-Tarp® comes to the customer in roll form. Simply cut the retaining tape with a utility knife or scissors and unfold the tarp.
2) Unroll and place white side up.
3) Adjust the tarp to where it is square and install the next tarp. The tarps should be overlapped at the seams. Make sure that you have insulation to insulation. For a continuous vapor barrier, seams should be taped using an appropriate tape product.
4) When coming to an obstruction such as plumbing, simply put the tarp up to the obstruction, with scissors or a sharp utility knife, cut an "X" in the tarp. Slide the tarp over the obstruction and continue. When cutting the tarp to size, use scissors.
5) Insul-Tarp® is manufactured with grommets in the side flanges. These grommets can be used to tie down the tarps in windy conditions.
6) If air pockets occur, when pouring the concrete slab, simply cut a slit in the top layer of the tarp to release any trapped air. Then place a piece of appropriate tape over the slit and continue pouring. |
